200 - 1000mm Drop Height Package Testing Equipment With Digital
Height Display
What is Drop Testing?
Drop testing determines the ability of a package to withstand the
rigors of handling by people and machinery in the distribution
environment. Numerous studies have shown conclusively that a truly
flat drop represents the worst possible input to a packaged
product. Therefore, it is crucial that laboratory drop testing be
done on a drop test system designed to insure the flattest impacts
possible. In addition to accurate flat drop testing, this machine
allows drop testing to be performed on the package's edges and
corners, for complete performance evaluation. Drop Testers allow
you to thoroughly examine the effectiveness of package cushioning
and its ability to protect your product, dunnage, closures, and
other critical design attributes when exposed to all possible drop
test orientations.
Uses
This series of drop test stand is mainly used for testing
simulation package in the transportation, loading and unloading
process under the influence of drop impact,resistance to impact
strength for the
identification of package and the rationality of the design of
packaging.
The machine through the way of free fall, for vertical impact test
specimens.Specimen Angle of free choice,
edges and three state to drop test, drop test height is prepared in
advance.When the specimen height to
preset automatically stop after positioning.According to the
different size of products to choose the
distance between the test arm, electric adjustable width.This machine free
release mechanism is flexible
and reliable, to ensure that the specimen in the release of free
fall and the moment is not affected by
anyexternal force, on the way to ensure that the specimen required by the state of
falling.
Standard
Design standards:GB4757.5-84 JISZ0202-87 ISO2248-1972(E)
Specifications
Model | LY-7073 | Drop Height | 200—1000 mm | Max Weight of Specimen | 65Kg | Test space(mm) | 1500×1500×1000 | Impact board dimensions (Length*Width*Thickness) | 1700×1200×16mm | Corbel dimensions(mm) (Length*Width*Thickness) | 160×180×8mm | Overall dimensions(mm) | 1600x2350x2200 (approximately size needs to see the real machine ) | Net weight(kg) | 600 | Error for Drop | <2° | Error for Drop Height (mm) | ±10 | Power | 380V, 50Hz, 3PH | Fitting modes | Rhombohedrons, Angle, face | Height Display modes | digital | Rate of work | 4KWA |
|
Characteristics
1. Advanced structure ensure that bracket and specimen separate freely
and specimen drop freely
through bracket rapid downward motion then rotation movement. It delivers
perfect test for specimen side,
edge and corner.
2. It uses electric reset, electronically controlling falling,
electric lifting, which makes it is easy to operate.
3. High Accuracy, direct display
4. It is steady when it is dropping and lifting
5. According to different test product size, through the power button
to adjust the distance between the
bracket, it can test for multiple products
Photo Reference
